905-624-3854
|
|

Exhaust Fans

Exhaust Fan

When it comes to running a restaurant, you have to run it right. The work you put into creating good food must be accompanied with the work you need to put to build your ventilation system to make sure your working and business place is healthy working environment , comfortable and safety. This is where a restaurant exhaust fan installation in Mississauga and Oakville becomes an essential part of your restaurant’s operations.

Restaurant ventilation is not just for the convenience of your customers—although that’s important—it’s also a part of the law.

If you don’t have a restaurant exhaust fan providing proper ventilation, you’re not in compliance with health and safety codes and potentially could be shut down!

On top of this, there are health, safety and building codes such as NFPA 96 that restaurants must comply with in order to operate. A complete system includes an exhaust hood and an exhaust fan that are working together with a fresh air supply fan. HVAC FOR LIFE offers a variety of exhaust fan series, please find the list of the exhaust fans in Mississauga and Oakvillewe do carry .

Direct Drive | Model: DU-H

  • Air Volume: 2 – 22,500 cfm
  • Maximum SP: 4″ wg. @ standard air density
  • Variable speed control standard on single phase units.
  • Emergency disconnect switch comes standard on all units.

Belt Drive | Model: BDU

  • Air Volume: 2 – 22,500 cfm
  • Maximum SP: 2.75″ wg. @ standard air density
  • High efficiency and low tip speeds provide quiet operation.
  • Emergency disconnect switch comes standard on all units.

Belt Drive – High Pressure | Model: BDU-HP

  • Air Volume: 2 – 22,000 cfm
  • Maximum SP: 5″ wg. @ standard air density
  • High efficiency and low tip speeds provide quiet operation.
  • Emergency disconnect switch comes standard on all units.

Direct Drive | Model: DR-H

  • Air Volume: 1 – 25,000 cfm
  • Maximum SP: 4″ wg. @ standard air density
  • Centrifugal Direct Drive Fans are designed to pull more air under higher static pressures. The efficient, balanced wheel and air inlet design contribute to maintaining low noise levels and extended motor life. These fans are especially suited for installation in hospitals, schools, motels and hotels, auditoriums, office buildings and light industrial areas.
    Spun aluminum housing for rust-free, weather resistant durability.
  • All sizes can be wall mounted.
  • Standard emergency disconnect switch.

Belt Drive | Model: BDCR

  • Air Volume: 2 – 24,500 cfm
  • Maximum SP: 3.5″ wg. @ standard air density
  • A wide variety of motors are available to meet specific application needs.
  • Heavy duty construction, durable and weather resistant.
  • Non-overloading backward inclined wheels, blades and inlets fabricated from aluminum.
  • High efficiency combined with low tip speeds result in quiet operation.
  • Standard emergency disconnect switch.

Belt Drive – High Pressure | Model: BDCR-HP

  • Air Volume: 1 – 15,500 cfm
  • Maximum SP: 4.5″ wg. @ standard air density
  • A wide variety of motors are available to meet specific application needs.
  • Heavy duty construction, durable and weather resistant.
  • Non-overloading backward inclined wheels, blades and inlets fabricated from aluminum.
  • High efficiency combined with low tip speeds result in quiet operation.
  • Standard emergency disconnect switch.

Fabi-rm | General and restaurant duty utility set

  • Air Volume: 150 – 30,000 cfm
  • Maximum SP: 6″ wg. @ standard air density
FEATURES & BENEFITS
  • Use with General Ventilation (UL705) and for Restaurant Duty (UL762) and ULC-S645
  • Vented Motor Cover and Continuously Sealed Housing for added weather protection
  • Scroll and Motor Compartment Connected for added Structure
  • Easily Accessible Clean Out Door and Motor Access from 3 Sides
  • Standard 2″ Grease Drain
  • Standard Emergency Disconnect Switch
  • Standard Heat Slinger and Heavy Duty Pillow Block Bearings for Belt Drive option
  • Standard Shaft Seal for Belt Drive option
  • Standard Pivot Plates for easy Belt Adjustment
  • Double Groove Pulleys standard for 2 HP and Above Motors
  • Discharge Outlet Flanges Available on All Sizes
  • Temperature Ratings – Aluminum Wheel, 350 degrees F
OPTIONS
  • Belt Drive
  • Belt Drive High Pressure
  • Direct Drive
  • Discharge Extension
  • Discharge Screens
  • Discharge Shutter (UL705 Only)
  • Discharge Configurations: Vertical, Horizontal Left or Horizontal Right
  • Vibration Isolators
  • Extended Lube Lines

Request Quote

Contact us to find the right Exhaust Fan for your needs

GET A QUOTE

In order to find complete information about our exhaust and ventilations options, Call us today at  905-624-3854.