Commercial Unit Heaters

Trane Gas Fired Unit Heaters

Trane Gas-Fired Unit Heaters

Separated Combustion Propeller Fan Gas Unit Heaters

Model GAND

The Trane separated combustion propeller fan gas unit heaters can yield higher seasonal efficiencies. A power venting system draws in a controlled amount of outdoor air for combustion and exhausts flue products from the building. The burners, pilot and flue system are totally enclosed within the unit, effectively isolating the entire combustion process from the dust, humidity and chemicals in the heater’s surrounding environment.

GAND Separated Combustion Gas-Fired Propeller Unit Heater

 
Model Heating BTUH CFM Thermal
  Input Output   Efficiency
GAND100 100,000 80,00 1,480 80%
GAND125 125,000 100,000 1,650 80%
GAND150 150,000 120,000 2,220 80%
GAND175 175,000 140,000 2,530 80%
GAND200 200,000 160,000 2,640 80%
GAND225 225,000 180,000 2,700 80%
GAND250 2500,000 200,000 3,100 80%
GAND300 300,000 240,000 4,400 80%
GAND350 350,000 280,000 5,000 80%
GAND400 400,000 320,000 5,300 80%

Gas Fired Unit Heaters

 

Download Specs (PDF)

 

High Efficiency Centrifugal Fan Gas Unit Heaters

Model GBND

The Trane high efficiency centrifugal fan gas unit heater incorporates the same features as the high efficiency propeller unit heater. An exceptionally balanced centrifugal blower assembly results in quieter operation. The high efficiency centrifugal fan is also well-suited for high static applications where ductwork is required. Duct discharge flanges may be ordered in lieu of horizontal louvers to accommodate ductwork. Trane’s high efficiency centrifugal fan gas unit heater carries a ten-year non-prorated warranty on the heat exchanger, flue collector and burners.

GBND Gas-Fired Blower Unit Heater

 
Model Heating BTUH CFM Thermal
  Input Output   Efficiency
GBND100 100,000 80,000 1,200 80%
GBND125 125,000 100,000 1,575 80%
GBND150 150,000 120,000 1,975 80%
GBND175 175,000 140,000 2,300 80%
GBND200 200,000 160,000 2,400 80%
GBND225 225,000 180,000 2,600 80%
GBND250 250,000 200,000 2,850 80%
GBND300 300,000 240,000 3,950 80%
GBND350 350,000 280,000 4,600 80%
GBND400 400,000 320,000 4,8000 80%

Commercial Gas Fired Unit Heaters

 

Download Specs (PDF)

 

High Efficiency Propeller Fan Gas Unit Heaters

Model GHND

Trane high efficiency propeller fan gas unit heaters can achieve annual fuel savings of 20 to 25 percent or more over conventional gravity vented heaters. Features include a factory installed flue vent fan and sealed flue collector that control combustion and excess air during the on-cycle. Heated air no longer escapes through the draft diverted opening during the off cycle. Energy saving intermittent pilot ignition reduces gas losses. The pilot only operates when required. Horizontal power venting allows for side wall venting, smaller openings and single walled vent pipe. These high efficiency gas fan unit heaters carry a ten-year non-prorated warranty on the heat exchanger, flue collector and burners.

GHND High Efficiency Propeller Fan

 
Model Heating BTUH CFM Thermal
  Input Output   Efficiency
GHND30 30,000 24,000 750 80%
GHND45 45,000 36,000 800 80%
GHND60 60,000 48,000 1,050 80%
GHND75 75,000 60,000 1,100 80%
GHND100 100,000 80,000 1,480 80%
GHND125 125,000 100,000 1,650 80%
GHND150 150,000 120,000 2,200 80%
GHND175 175,000 140,000 2,530 80%
GHND200 200,000 160,000 2,640 80%
GHND225 225,000 180,000 2,700 80%
GHND250 250,000 200,000 3,100 80%
GHND300 300,000 240,000 4,400 80%
GHND350 350,000 280,000 5,000 80%
GHND400 400,000 320,000 5,300 80%

Unit Heaters Mississauga

 

Download Specs (PDF)

 

Separated Combustion Centrifugal Fan Gas Unit Heaters

Model GKND/GKPD

The separated combustion centrifugal fan gas unit heater incorporates all the same features asthe separated combustion propeller unit heater. In addition, this unit features quiet operation due to an exceptionally balanced centrifugal blower assembly and high static applications where duct work is required. Duct discharge flanges may be ordered in lieu of horizontal louvers to accommodate duct work.

GKND Separated Combustion Centrifugal Fan

 
Model Heating BTUH CFM Thermal
  Input Output   Efficiency
GKND100 100,000 80,000 1,200 80%
GKND125 125,000 100,000 1,575 80%
GKND150 150,000 120,000 1,975 80%
GKND175 175,000 140,000 2,300 80%
GKND200 200,000 160,000 2,400 80%
GKND225 225,000 180,000 2,600 80%
GKND250 250,000 200,000 2,850 80%
GKND300 300,000 240,000 3,950 80%
GKND350 350,000 280,000 4,600 80%
GKND400 400,000 320,000 4,800 80%

commercial unit heaters Toronto

 

Download Specs (PDF)

 

High Efficiency Indoor Gas Duct Furnace

Model GLND

The Trane high efficiency indoor gas duct furnaces can achieve annual fuel savings of 20 to 25 percent or more over conventional gravity vented units. Features include a factory installed flue vent fan and sealed flue collector that control combustion and excess air during the on-cycle. Heated air no longer escapes through the draft diverted opening during the off cycle. Energy saving intermittent pilot ignition reduces gas losses. The pilot operates only when required. Horizontal power venting allows side wall venting, smaller openings and single wall vent pipe.

GLND Indoor Gas-Fired Duct Furnace

 
Model Heating BTUH CFM
  Input Max Input Min Output Min Max
GLND100 100,000 50,000 80,000 929 2469
GLND125 125,000 62,500 100,000 1157 3086
GLND150 150,000 75,000 120,000 1389 3704
GLND175 175,000 87,500 140,000 1620 4321
GLND200 200,000 100,000 160,000 1852 4938
GLND225 225,000 112,500 180,000 2083 5556
GLND250 250,000 125,000 200,000 2315 6173
GLND300 300,000 150,000 240,000 2778 7407
GLND350 350,000 175,000 280,000 3241 8642
GLND400 400,000 200,000 320,000 3704 9877

 

Download Specs (PDF)

 

Separated Combustion Centrifugal Fan Gas Unit Heaters

Model GKPD

The separated combustion centrifugal fan gas unit heater incorporates all the same features asthe separated combustion propeller unit heater. In addition, this unit features quiet operation due to an exceptionally balanced centrifugal blower assembly and high static applications where duct work is required. Duct discharge flanges may be ordered in lieu of horizontal louvers to accommodate duct work.

GKPD Separated Combustion Indoor Gas-Fired Duct Furnace

 
Model Heating BTUH CFM
  Input Max Input Min Output Min Max
GKPD100 100,000 50,000 80,000 822 3,700
GKPD125 125,000 62,500 100,000 1,028 4,625
GKPD150 150,000 75,000 120,000 1,233 5,550
GKPD175 175,000 87,500 140,000 1,439 6,475
GKPD200 200,000 100,000 160,000 1,645 7,401
GKPD225 225,000 112,500 180,000 1,850 8,326
GKPD250 250,000 125,000 200,000 2,056 9,251
GKPD300 300,000 150,000 240,000 2,467 11,101
GKPD350 350,000 175,000 280,000 2,878 12,951
GKPD4000 400,000 200,000 320,000 3,289 14,801

 

Download Specs (PDF)

 

Tubular Heat Exchanger Propeller Fan Unit Heater

Model GTND/GTPD

The Trane tubular heat exchanger is a durable unit heater that provides an alternative to the traditional clam shell style. These propeller style units combine the latest tubular heat exchanger technology with in-shot burner design to create an efficient operating unit.

GTND Tubular Gas-Fired Direct Spark Propeller Unit heater

 
Model Heating BTUH CFM Thermal
  Input Output   Efficiency
GTND30 30,000 24,900 370 83%
GTND45 45,000 37,350 550 83%
GTND60 60,000 49,800 740 83%
GTND75 75,000 61,500 920 82%
GTND90 90,000 73,800 1,100 82%
GTND105 105,000 86,100 1,300 82%
GTND120 120,000 98,400 1,475 82%

 

Download Specs (PDF)