Commercial Packaged Gas/Electric Units

Coleman Packaged Gas Electric Units

Coleman Packaged Gas/Electric Units

PAC-13 Comforter Packaged Unit

Coleman Comforteer™ Package Air Conditioner
Coleman Comforteer Series packaged A/C units are designed for outdoor installation that saves indoor living space. Designed to deliver maximum cooling while using minimum amounts of energy. The compact design allows easy installation and reduces shipping damage. Complete with 4 way forkable, full perimeter base rails, these units provide easy access for a forktruck while providing a raised base to prevent moisture build up.

Special benefits:

  • Three footprints to optimize performance and keep these units compact and easy to install.
  • Constructed of pre-painted galvanized steel to protect against corrosion and resists fading.
  • Internally protected compressor to protect against high pressure and high temperature.
  • Factory installed liquid line filter drier to keep the refrigerant system moisture free.
  • Large condensing coil surface for extremely efficient heat transfer to reduce the load on the compressor.
  • Complete line of field installed accessories including electric resistance strip heaters, hard start kits, thermostats, and more.

13 SEER – R22 Air Conditioning

 
Model Cooling Load Power
PAC-024 24000 208/230 -1-60
PAC-030 30000 208/230 -1-60
PAC-036 36000 208/230 -1-60
PAC-042 42000 208/230 -1-60
PAC-048 48000 208/230 -1-60
PAC-048 48000 460 -3-60
PAC-060 60000 208/230 -1-60
PAC-060 60000 460-3-60

Gas Electric Units

 

Download Specs (PDF)

 

PHP-13 Comforter Packaged Unit

Coleman Comforteer Packaged Heat Pump
Coleman Comforteer Series packaged Heat Pump units are designed for outdoor installation that saves indoor living space. Designed to deliver maximum cooling while using minimum amounts of energy. The compact design allows easy installation and reduces shipping damage. Complete with 4 way forkable, full perimeter base rails, these units provide easy access for a forktruck while providing a raised base to prevent moisture build up.

Special Benefits

  • Three footprints to optimize performance and keep these units compact and easy to install.
  • Constructed of pre-painted galvanized steel to protect against corrosion and resists fading.
  • Internally protected compressor to protect against high pressure and high temperature.
  • Factory installed liquid line filter drier to keep the refrigerant system moisture free.
  • Large condensing coil surface for extremely efficient heat transfer to reduce the load on the compressor.
  • Complete line of field installed accessories including electric resistance strip heaters, hard start kits, thermostats, and more.

13 SEER – R22 Heat Pump

 
Model Cooling Load Power
PHP-024 24000 208/230 -1-60
PHP-030 30000 208/230 -1-60
PHP-036 36000 208/230 -1-60
PHP-042 42000 208/230 -1-60
PHP-048 48000 208/230 -1-60
PHP-048 48000 460 -3-60
PHP-060 60000 208/230 -1-60
PHP-060 60000 460-3-60

Heat Pump replacement

 

Download Specs (PDF)

 

DW -03 to -05 Packaged Unit

DW -03 to -05 Packaged Unit
The convertible 3 to 5 ton commercial rooftop line combines a high-efficiency and advanced-economizer controls with unprecedented installation flexibility and low-installed costs. A single footprint size serves all units from 3 to 5 tons. Offered with Natural Gas heat.This new DW -03 to -05 line also has our Simplicity control board standard on every unit.

Special Benefits

  • Simplicity Control Board
  • Installation time and costs are reduced by easy power and control wiring.
  • All units are factory-wired, piped, charged, and tested prior to shipment.
  • Factory-installed options such as stainless steel heat exchanger, electric heating elements, single enthalpy economizer, high static drive blower motor, coil guard, dirty filter switch, hinged filter door, and tooless access panels further reduce installation costs.
  • BAS factory mounted controls include Simplicity Intelli-Comfort, Novar, Honeywell, Johnson, and CPC.
  • Factory mounted supply and return air smoke detectors.
  • Gas and electric utility knockouts are provided on unit side and bottom for easy connections.
  • Convertible airflow design means no panel cutting is required, and no accessory panel is necessary.
  • Wide range of indoor airflows using belt-drive blowers.
  • Durable finish, made of powder-painted, galvanized steel to meet 1000-hour salt-spray test demands.
  • Full-perimeter base rails are permanently attached to provide a solid unit foundation and fork lift access.
  • Compressor is internally protected against high pressure and temperature.
  • Grooved copper tubes and enhanced aluminum- fin construction improve heat transfer.
  • Heat exchangers are corrosion-resistant, with aluminized steel tubular construction for durability and long service life.
  • Permanently lubricated condenser and evaporator fan motor bearings need no annual maintenance.
  • Complete line of field-installed accessories, propane and high-altitude conversion kits, motorized dampers, single enthalpy economizers, and dual enthalpy sensors are available

13 SEER – R22 Heat Pump

 
Model Cooling Load Output BTU/H
DW-03N05 36000 50000
DW-04N07 48000 75000
DW-03N11 36000 100000
DW-05N11 60000 100000
DW-04N13 48000 125000
DW-05N13 60000 125000
DW-03D07 36000 75000
DW-04D07 48000 75000
DW-05D07 60000 75000
DW-03D13 36000 125000
DW-04D13 48000 125000
DW-05D13 60000 125000
DW-03S05 36000 50000
DW-03T07 36000 99000
DW-04T07 48000 75000
DW-05T07 60000 75000
DW-04S07 48000 75000
DW-03T13 36000 125000
DW-04T13 48000 125000
DW-05T13 60000 125000
DW-03S11 36000 100000
DW-05S11 60000 100000
DW-05S13 60000 125000

R22 Coleman Heat Pump

 

Download Specs (PDF)

 

DL -06 to -12 Packaged Unit

Single Package Cooling and Heating/Cooling Units (DL) 6-1/2 to 12-1/2 Ton
The most significant commercial rooftops advance in a generation is here. The 9.0 EER Coleman line. Flexible, single-package models in cooling and electric/gas heat configurations, with side and down airflow convertibility. A common footprint allows easy installation on a curb, slab, roof rack, or frame. Every unit is completely charged, wired, piped, and tested. Servicing is simple with a slide-out motor and blower. You'll also discover foil-faced insulation for improved IAQ. Two compressors and independent refrigeration circuits ensure reliability.

Special Benefits

  • A single 50 3/4" H x 59" W x 89" D cabinet size with a common 50 1/2" W x 80 5/8" D footprint means simple installation.
  • Specify units for cooling only, cooling with electric heat, and cooling with gas heat.
  • Two-stage heat/two-stage cool provides ultimate comfort.
  • Convertibility for side or down airflow discharge, with single-enthalpy economizers used on either application.
  • Choose from a wide range of factory-installed options and standards like disconnect switches, barometric relief and power exhaust, smoke detectors, and stainless steel heat exchangers.
  • The dual-circuit reliability of two compressors with independent refrigeration circuits, electronic spark ignition, and power-vented combustion.
  • Install these compact units almost anywhere there’s a curb, slab, roof rack, or frame.
  • Each unit is completely charged with R-22 — wired, piped, and tested.
  • All units are assembled and delivered on rigid, full-perimeter base rails, allowing for 3-way forklift access and overhead rigging.
  • Tool-free maintenance with features like hinged doors for all-access panels, slide-out blower and blower motor tray, and self-tensioning blower belt.
  • IAQ features like foil-faced insulation, pitched roof, and removable drain pan.
  • Can be ordered practically ready for immediate installation.

10 SEER – R22

 
Model Cooling Load (Tons) Power Output BTU/H
DL-06N18NTAAA 6.5 230-3 144000
DL-06N18NTAAA 6.5 575-3 144000
DL-07N18NTAAA 7.5 230-3 144000
DL-07N18NTAAA 7.5 575-3 144000
DL-08N18NTAAA 8.5 230-3 56000
DL-08N18NTAAA 8.5 575-3 56000
DL-10N24NTAAA 10 230-3 192000
DL-10N24NTAAA 10 575-3 192000
DL-12N24NTAAA 12 208-3 192000
DL-12N24NTAAA 12 575-3 192000

 

Download Specs (PDF)

 

DL -15 to -25 Packaged Unit

DL -15 to -25
The convertible DL-15 thru -25 commercial rooftops line combines standard high efficiency and advanced economizer controls with installation flexibility and low installed costs. This new series units also have our Simplicity control board standard on every unit.

Special Benefits

  • Installation time and costs are reduced by easy power and control wiring.
  • All units are factory-wired, piped, charged, and tested prior to shipment.
  • Factory-installed options such as stainless steel heat exchanger, electric heating elements, single enthalpy economizer, power exhaust and high static drive blower motor further reduce installation costs.
  • Gas and electric utility knockouts are provided on unit side and bottom for easy connections.
  • Convertible airflow design means no panel cutting is required, and no accessory panel is necessary.
  • Wide range of indoor airflows using belt-drive blowers.
  • Durable finish, made of powder-painted, galvanized steel to meet 1000-hour salt-spray test demands.
  • Full-perimeter base rails are permanently attached to provide a solid unit foundation.
  • Compressor is internally protected against high pressure and temperature.
  • Grooved copper tubes and enhanced aluminum- fin construction improve heat transfer.
  • Heat exchangers are corrosion-resistant, with aluminized steel tubular construction for durability and long service life.
  • Permanently lubricated condenser and evaporator fan motor bearings need no annual maintenance.
  • Complete line of field-installed accessories, propane and high-altitude conversion kits, motorized dampers, single enthalpy economizers, and dual enthalpy sensors are available

<p.

10 SEER – R22

 
Model Cooling Load (Tons) Power Output BTU/H
DL-15N30ATAAA 15 230-3 240000
DL-15N30AXAAA 15 575-3 240000
DL-15N40ATAAA 15 230-3 320000
DL-15N40AXAAA 15 575-3 320000
DL-20N30ATAAA 20 230-3 240000
DL-20N30AXAAA 20 575-3 240000
DL-20N40ATAAA 20 230-3 320000
DL-20N40AXAAA 20 575-3 320000

 

Download Specs (PDF)